Project Overview
WHL Engineering was instructed to assess the feasibility of removing an internal wall between a kitchen and dining room within a traditional stone-built property.
The scope included determining whether the wall was load-bearing, reviewing the direction and support of ceiling joists, and identifying any potential constraints such as concealed services or impacts on existing kitchen fittings. A visual inspection of accessible areas, including the roof void and first-floor structure, was undertaken to inform safe removal and any necessary temporary or permanent structural measures.
The wall was identified as a half-brick partition with ceiling joists spanning independently of it, confirming that it is non-load-bearing under typical conditions. No immediate evidence of concealed services was observed; however, confirmation through opening-up works was advised. The inspection of the roof void and first-floor structure supported the conclusion that the wall does not provide structural support, although the presence of kitchen units fixed to the wall presents practical considerations for maintaining functionality during the alteration.
It was recommended that opening-up works be undertaken prior to removal to confirm the wall composition and ensure no concealed services or unforeseen structural elements are present. Temporary propping should be installed during removal to maintain stability and ensure safe working conditions. While permanent structural support is not anticipated, provision should be made for installation of a supplementary timber joist if unexpected conditions arise. To maintain the usability of the kitchen following removal, a timber backing board should be installed behind existing units where they previously abutted the wall.
Whether you need structural design, an appraisal of an existing building, investigation of a structural issue or civil engineering support for a development, speak to WHL Engineering about the right way forward.
